Ideal If ...
|
|
|
|
|
|
|
|
Do some of these points match your needs?
Contact Number
Tel: +(6)03-5121 8266 | Fax: +(6)03-5121 0266
nutech1@nutechmalaysia.com
HOW IT WORKS
In Very Narrow Aisle (VNA) Pallet Rack Systems, the space separating parallel rack units is greatly reduced, and pallets are placed and retrieved using a side loading fork truck aka. VNA Reach Truck. This minimizes the size of the aisles between rows of racks and can reduce the aisle space by around 40%. A super flat floor is required.
The racking system is designed around the operating tolerances of your chosen Very Narrow Aisle (VNA) handling equipment with aisles marginally wider than the load. While these trucks are often more expensive than standard forklifts, using narrow aisles can give you major savings on building costs by allowing you to store more with less space.
Pallets in very narrow aisle systems are 100% selective. With VNA racking, access to stock is uncompromised and the amount of product stored in the warehouse is maximized. It is an effective method of increasing pallet storage within a given area. Your storage capacity can be increased by an additional 40% over Selective Pallet Rack (SPR) by choosing VNA.
NUTECH Very Narrow Aisle Rack installed at customer site.
Illustration of Very Narrow Aisle Rack System compares to Selective Pallet Rack System.
General Benefits
100% Access
Very Narrow Aisle Rack System allows complete access to all stored pallets. Each pallet can be easily accessed with a special reach truck.
Fast Picking Rate
Retrieval of palletized goods is very fast because the system allow 100% accessibility to all stored pallets.
Good Product Protection
Controlled material handling provides safe and damage free environment.
Components and Options
Frame
- 1.6mm, 1.8mm, 2.0mm thick
- N60, N90, N115
- Epoxy coated or Galvanized frame
The Details
Nutech very narrow aisle racking is made with the same frames as our well established pallet racking system. It is fully screwed in place and particularly well suited to heavy loads. At the top end, the frames are connected to each other with struts in side-to-side and in front-to-back direction. Additionally, the uprights of each frame are linked to each other by horizontal and diagonal struts to ensure that all parts of the frame are solidly connected to provide excellent rigidity. Nutech N90 Upright, SC beam, and Safety Pin is shown in picture.
Hook-in Beam
- Rapid assembly
- Adjustable height
- Equipped with Safety Pin
The Details
Rapid assembly thanks to a straightforward boltless system: The 3 or 4 hooks of the bracket perfectly slot into the upright perforations. Unintentional lifting is prevented by a safety pin which is secured against dropping out by a 90' turn. The hooked bracket is also designed to hold heavy loads and its height can be adjusted in 75mm intervals. Nutech Omega B Beam is shown in picture.
Pallet Support Bar
- Heavy duty, welded cuff design
- Easy installation, drops in place
- Epoxy powder coated
The Details
The pallet support bars provide additional safety and security under your pallet when placed in pallet racking system. Pallet Support Bars reduce load times because they give forklift driver confidence in loading pallet.
VNA Truck Guide
- Guides special reach truck into each aisle
- Highly Durable, Epoxy coated
The Details
The VNA truck guide is made of highly durable steel material that is designed to safely guide the special reach truck into the narrow aisles for loading and unloading activities.